0
Arlon 3170 (50 Yards Roll)
Arlon Series 3170 Intermediate Cast Overlaminate Pressure-Sensitive Film
Series 3170 overlaminate is a 1.3-mil (35 micron) gloss cast vinyl film with clear, permanent pressure-sensitive adhesive. Designed to protect printed graphics, the thinner facestock of Series 3170 provides a higher conformability for your vehicle wraps, intermediate signage, and graphics. Series 3170 is rated for outdoor durability up to 7 years. This product is not designed to be used as an optically clear window film.
Applications & Features:
• Protective overlaminate for Fusion Wrap, CalWrap, DPF 4600LX, DPF 4600GLX/MLX
• Protective overlaminate is approved for use with SLX Cast Wrap and SLX+ and provides outdoor
durability of up to 5 years.
• Vehicle and fleet graphics, intermediate signage, kiosks and POP displays
• Arlon overlaminate film is designed to be laminated cold without any heat
Technical Specifications:
Surface Finish: Gloss Meter (60° Reflection) with 80–90 Gloss Units
Thickness: Film Thickness: 1.3 mil (35 micron)
Tensile Strength:
- Tensile Strength: ≥ 6.5 lb/in (≥ 1.2 kg/cm)
- (Measured with 2-in (51 mm) jaw separation at 12 in/min (5.1 mm/s) speed)
Elongation: ≥ 200%
- Shelf Life: 2 years (in original packaging, stored at 70°F (21°C) with 50% relative humidity)
Application Temperature:
- Flat Surfaces: 40°F to 100°F (4.4°C to 38°C)
- Corrugated with Rivets & Channels: 60°F to 100°F (15°C to 38°C)
Service Temperature: -40°F to 175°F (-40°C to 79°C)
Performance Features:
- Dimensional Stability: Shrinkage after 158°F (70°C) for 48 hours: < 10-mil (0.25 mm)
- Peel Adhesion:
- 15 min (70°F): 3.5 lbs/in (0.63 kg/cm)
- 24 hours (70°F): 4.0 lbs/in (0.71 kg/cm)
- 1 week (70°F): 5.5 lbs/in (0.98 kg/cm)
- Liner Release: 55 g/2in (10.83 g/cm) at 90° and 300 in/min (760 cm/min)
- Temperature Resistance: Withstands service conditions from -40°F to 175°F (-40°C to 79°C)
- Width: 60 Inches 54 Inches
- Length: 50 Yards
- Finish: Gloss
- Brand: Arlon