0
Arlon 3220 Premium Cast Overlaminate
Arlon Series 3220 Premium Cast Overlaminate in Gloss, Luster, Satin and Matte Finishes
Series 3220 overlaminates are constructed of 2-mil (50 micron) cast vinyl film with clear, permanent pressure-sensitive adhesive. Designed to protect and prolong the life of printed images, Series 3220 extends the life of the graphics by 2 years. Series 3220 is rated for outdoor durability up to 7 years.
Applications & Features:
- Protective Overlaminate for SLX™ Cast Wrap, DPF 6100XLP, DPF 6000XRP, DPF 6000RP White, DPF 6500, DPF 6700, IllumiNITE Wrap™, DPF 2400, DPF 4600LX, DPF 4500GT/MT, DPF 8000™ Ultra Tack, DPF 8200 High Tack, DPF 9000, DPF 4000 and DPF 4300
- Long-term signage, kiosks, POP displays, fleet and vehicle applications
- Recommended dry time for printed images is 24-48 hours prior to laminating
- Series 3220 Gloss is UL 410 approved for slip resistance for interior floor graphics
- UV inhibitors to protect and extend the life of your printed graphic.
- Arlon overlaminate film is designed to be laminated cold without any heat
Technical Specifications:
Surface Finish:
- Gloss Meter 60° Reflection:
- Gloss: 80 to 90 Gloss Units
- Luster: 55 to 85 Gloss Units
- Satin: 20 to 30 Gloss Units
- Matte: 1.5 to 10 Gloss Units
Thickness: 2-mil (50 micron)
Tensile Strength: Width: ≥ 4.5 lb/in (≥ 0.8 kg/cm)
Elongation: Along: ≥ 150%
Shelf Life:
- 2 years from factory shipment
- Ideal storage temperature: 21°C and 50% relative humidity
Application & Service Temperature Range:
- Application: 40°F to 100°F (4.4°C to 38°C)
- Service: -40°F to 175°F (-40°C to 79°C)
Peel Adhesion: PSTC-1, 15 min at 70°F (21°C): ≥ 4.35 lb/in (≥ 0.78 kg/cm)
Dimensional Stability: Shrinkage after 48 hours at 158°F (70°C): 0.12 mm
Liner Release: TLMI release at 90°, 300 in/min (760 cm/min): 70 g/2 in (13.78 g/cm)
Optimized Performance:
- Weathering durability depends on surface preparation, surface maintenance, and exposure conditions.
- Vertical or upper outboard angles offer the best weather resistance.
- Avoid horizontal surfaces like auto hoods and roofs as they degrade quicker due to sun, moisture, dirt, and contaminants.
Floor Application:
- Approved under UL 410 for slip-resistance as floor graphic material.
- Recommended compatible media:
- DPF 4600GLX/MLX, DPF 8200 High Tack, DPF 8000 Ultra Tack, DPF 510 GTR/MTR, DPF 510GT/MT.
- For interior floor graphics, expect up to 6 months of service life.
- Performance varies based on surface type, foot traffic, environmental exposure, carpet type, and floor condition.
- Arlon does not offer a warranty for floor graphic applications.
- Width: 30 Inches 48 Inches 60 Inches 54 Inches
- Length: 50 Inches 25 Inches
- Finish: Gloss Satin Matte Luster
- Brand: Arlon
Accessory Products
Add a Review
Customer Review
Showing
0
Of
0