0
ArlonDPF2400XLP
DPF 2400XLP - Reflective Vinyl Film
Fleet Grade Reflective Digital Print Pressure Sensitive Film with Air-Egress
DPF 2400XLP is a 5-mil (125 micron) printable reflective vinyl film with bubble releasing, tinted, repositionable, permanent pressure-sensitive adhesive. The film conforms well to both flat and irregular surfaces when processed and applied according to Arlon recommendations. DPF 2400XLP meets or exceeds the following standards for motor vehicles: ISO 7591-1982, DOT FP-85 - Section 718, ECE 104 Class D*, and ASTM-D 4956-89, Spec. Type 1, Class 1. It is rated for outdoor durability up to 7 years (unprinted). Printed durability is dependent on the ink system used
Applications & Features :
- For full and partial fleet wraps, vehicle markings and any surface requiring reflective vinyl film.
- Recommended with dry application methods only.
- Speedy Installation with X-Scape Technology®.
- Exceptional Repositionability, Minimizing Bruising for Optimal Reflectivity.
- Enhanced Elongation for Optimum Conformability.
- Brilliant Graphics by Day, Luminous Graphics by Night.
- World-Class Printability - Designed for Eco-Solvent, Solvent, Latex and UV
Technical Specifications:
- Surface Finish: Gloss: 80 to 90 Gloss Units (Gloss Meter 60° Reflection)
- Thickness: 5-mil (125 micron)
- Tensile Strength: ≥ 10.0 lb/in (≥ 1.8 kg/cm)
- Elongation: ≥ 90%
- Shelf Life: 2 Years from factory shipment (Ideal storage: 70°F/21°C, 50% relative humidity)
Temperature Range:
- Application Temperature: 50°F to 100°F (10°C to 38°C) on clean, dry substrate
- Service Temperature: -40°F to 160°F (-40°C to 71°C) on clean, dry substrate
Dimensional Stability:
- Shrinkage: < 10 mils (< 0.254 mm) after 158°F (70°C), 48 hours
Peel Adhesion:
- Test Method:
- PSTC-1, 15 minutes at 70°F (21°C) on Stainless Steel
- Peel Adhesion:
- ≥ 4.2 lb/in (≥ 0.7 kg/cm)
- Liner Release:
- TLMI Release at 90°, 300 in/min (60 cm/min)
- 40 g/2 in (8 g/cm)
Gasoline Resistance:
- Film Applied to Etched Aluminum Panels: No appreciable effect after 24 hours (LS-300 Method 4.4.6)
Optimum Performance & Application Guidelines:
- Best Weathering Resistance:
- Resists weathering best when applied to vertical angles due to reduced exposure to UV, moisture, and contaminants
- Horizontal applications may experience quicker deterioration from increased exposure to sun and dirt
- Installation & Removal:
- Use heat (above 130°F / 54°C) for smoother and faster removal
- Recommended Tools: Flame-type torch or heat gun
- Removal Process: Peel film at a shallow angle (< 90°) for the cleanest separation
- Two-person removal is faster for consistent and uniform heat distribution
- Width: 48 Inches
- Length: 50 Yards 10 Yards
- Finish: Gloss
- Brand: Arlon
Accessory Products
Add a Review
Customer Review
Showing
0
Of
0